Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Handlebars

Zipp SL-70 Aero Handlebar
$327.00
Zipp's SL-70 Aero is, in every way, a high-performance bar. This unidirectional carbon handlebar is packed with innovations for best-in-class fit, ergonomics and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp’s most advanced bar refinements while building on the trend-setting aero legacy of the VukaSprint. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The 10-degree ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in the drops. - Unidirectional carbon construction - Airfoil top bar reduces drag by .63 Newtons over traditional round tube - Drops angled out 4 degrees with 10 degree ramp angle - Features Zipp’s Rapid Routing system, also used in the Vuka Aero system, for easy internal cable routing. UCI legal. - Compatible with all mechanical brake/gear systems and all electronic gear systems. - Not clip compatible.
Giant Contact SLR Aero Road Handlebar
$285.00
- Ultra-light high-performance full-SLR composite construction makes for maximum stiffness and lowest possible weight - 9° rearward/5° upward sweep - 19mm rise - Micro-adjust set-up markings - Not compatible with bar ends
Deda Elementi Velocita CrMo Track Bar
$103.29
- High-polished, chrome-plated CrMo construction - Purebred classic track bar in either 31.8mm or 26.0mm bar-clamp diameter - Deep drop and reach profile for true sprinting performance - 654g @ 42cm(26.0mm): drop/reach are measured center-to-center
Bontrager Elite IsoZone VR-SF Road Handlebar
$99.99
Goodbye, chatter Ready to ditch the wrist fatigue that accompanies rough road rides? IsoZone foam pads are integrated directly into the tops of the alloy Elite IsoZone bar for a 20% displacement in vibration. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Soak up the chatter and ride on in comfort while enjoying a better looking cockpit. Product details - Custom-butted, 6066-T6 alloy construction - Confidently access brake levers while in the drops with our VR-SF shallow, flared drop and shorter reach design - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Compatible with clip-on aero bars - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control set-up
Zipp Service Course 70 XPLR
$55.00
On today’s road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 XPLR, our newest drop-bar offering. The bar’s moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle — from paved roads to gravel, mud, dirt, and even singletrack. The Service Course 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Whether on a two-hour training ride from home or a 200-mile gravel adventure, today’s riders demand more of their cockpit: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops while focusing on two crucial metrics — outsweep and flare. - Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding. - The 70 XPLR features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul. - Distinctive silver finish - Reach: 70mm - Drop: 115mm
Bontrager Line 35 MTB Handlebar
$79.99
A 35mm mountain bar that maintains a forgiving ride feel and maximizes strength with minimal weight. Large and in charge Line 35 is ready for any terrain and changes what's possible on the trail. It maintains comfort and control on any ride, and an oversize clamping diameter increases strength and decreases overall bar and stem weight while ensuring a compliant, forgiving ride. Proven sweep and convenient graphic markings help dial in the perfect setup. Product details - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
FSA Omega Compact Road Handlebar
$49.99
Upgrade your bike with FSA's Omega Road Handlebar. The double-butted, tapered and shot-peened aluminum construction makes this bar light and durable. It also features an ergonomic curve for comfort and a variety of hand positions. Plus, the Omega even sports a groove that makes cable routing easy.
Fizik Cyrano Composite Carbon R1 Handlebar - Snake
$299.99
Fizik's Cyrano R1 Handlebar gives every cyclist the same low weight, high stiffness, and incredible ergonomics that the pros use. These carbon handlebars use Fizik's unique Spine Concept fitting technology to offer incredible ergonomics and a perfect fit on your bike. Designed for total compatibility with Fizik's saddles and stems (sold separately), the Cyrano 00 Snake handlebar optimizes your position for race day performance.
Parlee Cycles Handlebar
$375.00
Parlee's carbon handlebar is one of the most comfortable bars you'll find. The handlebar’s top has a rearward sweep and oval profile for a natural hand position and all-day comfort. The 35mm clamping area creates a solid union with the stem and fork. The ergonomic bend has a short 70mm extension and shallow 128mm drop that complements modern shift/brake lever combinations. This makes the ideal perch for the rider’s hands regardless of build kit. The drops have an extended return creating fuller hand positions for greater comfort. There are also trim lines on the bar termination at 5mm increments for a customized fit. Compatible with all modern rim and disc levers. - Weight: 220g - Bar Drop: 128mm - Drop Bend Style: Compact - Bar Reach: 70mm - Material: Carbon - Bar Top Style: Round
Zipp Vuka Clip Aerobar with Vuka Carbon Extensions
$250.00
The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust. The VukaClip is available with an above-bar or below-bar mounting system for achieving an optimized aero position. The VukaClip also has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with Vuka Alumina extensions, the Vuka Carbon Extensions as well as most extensions on the market. Features - Fit, security, and adjustability - Above-bar or below-bar mounting system - Compatible with most extensions
Zipp VukaBull Base Bar
$237.00
Get your next time trial or triathlon off to the right start with Zipp's VukaBull Base Bar. It's the first thing you reach for when you blast out of the start gate, so Zipp takes extra care with the carbon layup to ensure you have the lightest, most robust bar possible. The slightly concave nose section and forward-swept arms, along with the airfoil shape, reduce drag and stiffen the bar. Ergonomics are the key to comfort and speed, so it's available with a choice of zero or 40mm drop and the grips are angled up slightly for a more natural wrist angle when climbing and sprinting. Additionally, it has an extra wide aerobar clamping area for maximum versatility and adjustability.
Profile Design Svet R
$290.99
Reversible basebar wing improves fit for bicycles with smaller headtubes. Two-Way Fit System: Standard fit provides a low drop for aggressively positioned athletes who favor or fit needs dictate a low out-of-the-aerobars position which translate to fast, aggressive riding style. Flip the bar for an elevated position ideal for riders requiring higher stack in their cockpit position and higher relative pursuits. - Straight Brake Extensions: Straight, ergonomic brake extensions help maintain control while remaining aerodynamic. - Clean Cable Routing Pre-slotted internal cable routing on both sides for a clean profile. Di2 Compatible. - Weight: 220g (42cm) - Width: 40cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 100, 120, 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 160mm (center to tip) - Pursuit Drop: ±20mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No
Profile Design WING/10a
$84.99
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
ENVE M5 Mountain Handlebar 31.8mm
$170.00
A fly-weight, modern flat bar for XC and trail riding, available with a +/- 5mm rise. The M5 bar is ENVE's lightest XC and trail bar. Designed with an offset grip position and a 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9-deg sweep with the greater width and strength that’s demanded by today’s more aggressive XC riders.
ENVE Road Handlebar Compact Drop
$350.00
Full carbon fiber road handlebar with thoughtful ergonomics highlighted by a short reach shallow drop geometry and full Di2 compatibility. Who It's For Road riders with a preference for compact geometry, light weight, and refined electronic groupset integration. Why We Made It Because we understand that your ride experience can be established by the comfort and control achieved with a handlebar, we take handlebar design seriously. The ENVE Compact Road Handlebar is available in both a traditional and compact geometry and a variety of width options to meet the fitment needs of most cyclists. Ergonomics of the Road Bars are thoughtful and allow for a wide range of adjustability from tilt to brake/shift lever placement. To round off the finish, the ENVE Compact Road Handlebar can be routed externally for mechanical groupsets but is also drilled for internal electronic routing for modern electronic drivetrains including compatibility with Shimano RS-EW910 bar end plug junction box installations. The Compact Road Handlebar includes ENVE's Integrated Bar End Plugs.
Velo Orange Porteur Handlebar
$35.00
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
Race Face NEXT 1/4-inch Riser Carbon Handlebar
$169.99
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 5 mm - Bend: 8 deg - Weight: 175 g
Race Face Atlas Riser Handlebar
$79.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
Giant Contact SL Road Handlebar
$105.00
Giant's Contact SL Road Handlebar is made from a lightweight, tough 2014 aluminum. It features a dual radius drop and ovalized top profile in six sizes for an ergonomic fit. Plus, it's compatible with clip-on aerobars (sold separately).
Bontrager Madone XXX Integrated Bar/Stem KVF Aero
$599.99
The Madone is built as a seamlessly integrated machine designed to do one thing: go fast. Trek's Madone Integrated Bar/Stem is an important part of that integration. Available in a variety or widths and reaches so you can dial in your superbike specifically for you. - Compatible with model year 2016/17 Madone - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV carbon fiber construction - Seamless accessory integration with Blendr - Blendr accessory bases and mounts sold separately
TruVativ Stylo T20 Riserbar
$30.00
TruVativ's Stylo T20 Riderbar is crafted from butted aluminum for low weight and high strength. At 680mm wide, it gives you enough leverage to muscle your rig without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
Electra Cafe Cruiser Handlebar
$29.99
Grab life by the handlebars. Enjoy a life behind bars. Customize your bike with a new handlebar that fits your own personal style. For style, comfort or both. - Polished finish - Sturdy steel construction - Size: 760mm x 200mm - Clamp: 22.2mm
Easton EA70 AX Handlebar
$89.99
Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on gnarly terrain and long gravel assaults. - Weight of 42cm bar (grams): 290 - Bar Drop (mm): 80 - Drop Bend Style: Compact - Bar Reach (mm): 120 - Material: Aluminum - Bar Top Style: Round
Easton EA50
$49.99
Your rock-steady set and forget road bar. Only a few grams heavier than the EA70 and sporting the same MCD drop technology as our top of the line road bars. These budget friendly bars will leave you comfortable in the saddle all day without breaking the bank. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 315g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Reach: 80mm - Drop: 125mm - Materials: EA50 alloy
Zipp Service Course SL-88 Handlebars
$110.00
Get low with Zipp’s Service Course SL-88 bars. Their longer reach provides an extra aero advantage in the drops, and because they’re angled outwards by 3 degrees, your wrists remain in a strong, natural position. The ends of the drops are flat to reach straight down upon; this also helps keep your hands locked in place during sprints. Zipp paid attention to detail and crafted the transition from brake hood to the tops perfectly, ensuring a comfortable, ergonomic position wherever you choose to grasp. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.
Dimension Flat Top Shallow Reach Handlebar
$44.99
These are 31.8mm flat top road drop bars with very shallow reach. - Double-butted and tapered 6061-T6 aluminum bars - 120mm wide center section with 31.8mm diameter - Flat top bar with cable grooves - Accessory Mount Diameter (mm): 31.8 - Bar Clamp Diameter (mm): 31.8 - Bar Drop (mm): 125 - Bar Reach (mm): 70 - Bar Top Style: Flat - Clip-on Compatible: Yes - Color: Black - Defined Color: Black - Drop Bend Style: Compact - Material: Aluminum - Weight: 266g - Width: 38cm - Width Measurement: Center
Giant Comfort Handlebar Alloy
$12.00
- Ideal for fitness and comfort cyclists - A great replacement handlebar
Easton EC70 Aero Handlebar
$249.99
With the EC70 Aero, you'll stay comfortable while reducing drag. Thanks to the flattened top profile with internal cable routing and MCD shape technology, this handlebar provides more comfort during long days in the saddle while cheating the wind. And with Easton’s proven composite TaperWall technology and Intelligent Flexibility, the EC70 SL is nice and light at just 255 grams (42cm). - Weight of 42cm bar (grams): 255 - Bar Drop (mm): 130 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Carbon - Bar Top Style: Flat
Giant Contact SLR Aero Road Integrated Handlebar
$605.00 - $635.00
- Ultralight, one-piece full-composite construction fine-tuned for vibration damping and aerodynamics - Dual radius drop and aero top profile for maximum aerodynamics - 12 width/length combinations meets most performance fit needs - OverDrive 2 provides improved steering stiffness - Compatible with the new Contact SL Aero Clip-on system - Steerer diameter: 1-1/4-inch, compatible with 1-1/8-inch with adapter (sold separately)
Easton EA50 AX
$49.99
Easton’s new AX series now includes our budget friendly EA50 AX flared drop bar. With the same MCD drop technology as our top of the line road bars, flared to 16 degrees for comfort in the drops and control on gnarly terrain or long gravel assaults. It's time to take the road less traveled with EA50 AX. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 325g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Flare: 16-degrees - Reach: 80mm - Drop: 120mm - Materials: EA50 alloy
Page 1 of 5 Next page