Handlebars

This is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle—from paved roads onto gravel, mud, dirt, and even single track. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics: outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward. - Distinctive Zipp cosmetics - 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion - 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods - Ergonomic top with 3° backsweep - Lifetime warranty

- Timeless, classically styled back swept touring bar - Bar end shifter and brake lever compatible - Outward grip angles for proper ergonomics - Material: Steel

This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky

- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos

The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 XPLR, our newest drop-bar offering. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle — from paved roads to gravel, mud, dirt, and even singletrack. The Service Course 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Whether on a two-hour training ride from home or a 200-mile gravel adventure, today's riders demand more of their cockpit: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops while focusing on two crucial metrics — outsweep and flare. - Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding. - The 70 XPLR features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul. - Reach: 70mm - Drop: 115mm

Lightweight aluminum construction with a versatile riser bar design.

A gravel handlebar with a wider flare that gives riders more comfort and control through any terrain. The bar with a flare for adventure The GR Elite Road Handlebar is a lightweight alloy bar designed to give gravel and adventure riders more comfort, control, and confidence, especially when in the drops. IsoZone EVA pads deliver entire-ride comfort, while the bar's 75mm reach, 128mm drop, and 13-degree flare make it easy to access brake levers and shifting controls from all riding positions. Product details - 13-degree flare allows for more control in the drops - Custom-butted, lightweight 6061-T6 alloy construction - Shorter reach and wider flare allows for confident handling and easy access to controls - Replaceable IsoZone EVA pads add comfort while maintaining original grip diameter - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Laser-etched brake lever position lines for spot-on control setup - Compatible with clip-on aero bars

• Sturdy, chrome-plated steel construction • Back sweep: 6 degrees

Traditional trekking bar with butterfly bend provides many options for hand positions, making this bar a comfortable choice for touring and recreational cyclists alike. - Designed for City-Trekking use - Not intended for mountain biking - Bar Clamp Diameter (mm): 25.4 - Color: Black - Lever Compatibility: Mountain 22.2 - Weight: 479g - Width: 585mm

Bontrager's Race bar is crafted from custom-butted 2014-T6 aluminum for great strength, stiffness, and light weight. The shot-peened finish increases the fatigue life and adds a great look.

FSA's K-Force Compact Road Handlebar features a racy compact design for improved ergonomics and rider comfort. Its continuous carbon/Kevlar construction is super light and impressively stiff, making it perfect for climbing and big out-of-the-saddle efforts. It also has a 110mm center section for mounting accessories and its reinforced, textured clamping areas hold tight and secure.

Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike

Zipp’s Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features market-leading adjustability; it can be used with any stem to help you find your ideal position on the bike. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that’s stiff and streamlined while maintaining the UCI’s 3:1 aspect ratio requirement. - Market-leading adjustability in pad fore-aft, width, height, and angle - Integrated Carbon Aerobar works with any 31.8mm clamp stem - Integrated SRAM eTap AXS Blip box mount in the Center Cap - Rapid Routing cable exits are positioned for easy installation of brake cables - Vuka Aero ships with base bar, extension clamp, and armrest clamp - Extensions sold separately

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 Ergo handlebar. The Service Course lineup provides options to match every rider with a high-performance, precise fitting bar. The Service Course 70 Ergo packs a powerful punch of everything you'd want in a bar — a design based on feedback from pro bike fitters and riders, an ergonomic top section, and a price you'll love. - 6061 aluminum for low weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - ISO 4210 compliant

These are 31.8mm flat top road drop bars with very shallow reach. - Double-butted and tapered 6061-T6 aluminum bars - 120mm wide center section with 31.8mm diameter - Flat top bar with cable grooves - Accessory Mount Diameter (mm): 31.8 - Bar Clamp Diameter (mm): 31.8 - Bar Drop (mm): 125 - Bar Reach (mm): 70 - Bar Top Style: Flat - Clip-on Compatible: Yes - Color: Black - Defined Color: Black - Drop Bend Style: Compact - Material: Aluminum - Weight: 266g - Width: 38cm - Width Measurement: Center

Bored hands make bad rides, mix it up with some drop bars so you have positions aplenty! Duck into the drops and out of the wind if you're feeling aggro, relax and ride the tops if you're just taking a cruise or, add some hoods, and get out over the front wheel. The choice is yours. - Classic style drop bars perfect for getting a more aggressive riding posture on your fixie or road bike - Designed by us and perfect for any 25.4mm clamp, these puppies taper to 22.2mm for mounting all your lights, computers, etc... Race on. - 40cm/400mm width with a 138mm drop

Engineered for endurance riding, the ultra-lightweight Contact SLR D-Fuse handlebar offers compliance and ergonomic fit for the most demanding conditions. FEATURES: - Proprietary D-Fuse shaping on the tops for superior compliance and lightweight. - 8-degree flare in the shallow drops puts the hand and wrist in a comfortable and efficient position. - Compatible with Contact SLR and SL Aero and AeroLight stems for full internal cable routing. - Ergonomically shaped contact points fit the hand and palm from various angles, alleviating fatigue and numbness that can occur over long miles. - Precision composite lay-up for optimal weight and stiffness. - 40% more compliant and 15 grams lighter than the previous Contact SLR D-Fuse handlebar. SPECIFICATIONS: - Weight: 185g (420mm) - Bar Clamp Diameter: 31.8mm - Width: 380/400/420/440mm - Reach: 125mm - Drop: 72mm - Rise: 0° - Backsweep: 0° - Outsweep: 0° - Flare: 8° - Material: Carbon

Easton’s new AX series now includes our budget friendly EA50 AX flared drop bar. With the same MCD drop technology as our top of the line road bars, flared to 16 degrees for comfort in the drops and control on gnarly terrain or long gravel assaults. It's time to take the road less traveled with EA50 AX. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 325g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Flare: 16-degrees - Reach: 80mm - Drop: 120mm - Materials: EA50 alloy

For all the off-road drop bar fans, Velo Orange offers the Far Bar, an affordable off-road drop bar. With off-road drop bars, most riders have the bars set up at the same height as they would have flat bars set to. Most of the time you are riding, your hands are on the hoods of the brake levers. Then, for steep descents, put your butt back behind the saddle and use the drops to get a better grip on the brake levers. You can run brifters or standard road brake levers on them and use bar end shifters as well. The Daija Cycleworks crest appears on each side of the 31.8 mm clamp area. These bars are a little different then road bars in terms of measuring the width. The listed width - 44cm or 48 cm - is measured center of the drops to centre of the hoods. The overall width is 585mm for the 44cm size, 625mm for the 48cm size. - Weight: 292g - Drop: 110mm - Drop Bend Style: Compact - Reach: 76mm - Material: Aluminum - Bar Top Style: Round

- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep

The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°

Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

Superlight weight for a competitive edge. Comfort to carry you through long training days and crushing queen stages. The all-new CADEX Race Handlebar features innovative one-piece construction and an ergonomic design that’s stiff, responsive and easy on your hands.

An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

Proven shape, proven width, proven materials, and the artistic touch of Troy Lee Designs: voilà, the TRUVATIV CoLab TLD Carbon riser bars. These bars are stiff, tough, dependable, and give you all the comfort and positive steering feel you want. This is art on your bars for artistry in the corners. - Stiff, precise, and width-optimized for enduro, trail and aggressive xc - Carbon fiber perfection - DESCENDANT geometry from their best enduro rider’s input - Signature Troy Lee Designs style

Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm

Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers

When it comes to matching style with function, Zipp's stalwart Service Course 80 handlebars now have an option for those who prefer an ergonomic flat top. The Ergo version retains the same 80mm reach and 125mm drop of the existing Service Course 80 bars, with an ergonomic bend for the rider who likes reaching down to, rather than into, the drops. Lightweight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - New flattened bar top and 3° backsweep for a neutral wrist position on the tops - 7° ramp angle for a flat transition to the hoods and 4° outsweep at the drops - 80mm reach and 125mm drop for a medium-high position - 6061 aluminum for low weight and durability - Di2 RS910 junction compatible - Compatible with clip-on extensions (sold separately)

The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum. - Distinctive Zipp cosmetics - 7050 Aluminum - 80mm reach/125mm drop designed to fit a large number of riders - Clip-on compatible - Lifetime warranty

The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops

Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep

- Clamp Size: 7/8-inch - Width: 27.5-inch - Rise/Reach: 8.25-inch - Type: BMX - Material: Steel

Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 80mm reach and 125mm drop for a medium-high position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Di2 RS910 junction compatible - Lifetime warranty

Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

A great bar for your fixie, single speed, or cruiser. - Aluminum Arc bar with wide sweep - May come in OEM packaging - Back Sweep (deg): 27 - Material: Aluminum - Rise: 0mm

The DRV/AEROa is a high-performance aluminum aero drop bar featuring a truncated airfoil for aerodynamics, comfort and stiffness. The curve has been optimized for modern road levers. The innovative fit and ergonomics of the DRV system include a 7° ramp angle and a 4° flare in the drops, allowing a natural wrist angle for enhanced comfort and control. The DRiVe metric by Profile Design pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. What is your DRiVe? Gone are the days of simply measuring a drop bar by the standard reach, drop and width. Our DRiVe metric pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. - The DRiVe Metric: The DRiVe (Drop Reach Variant) position is measured via a 73° line beginning at the bar bore. The DRiVe metric pinpoints the line intersection with the drop. - DRiVe Reclaims Comfort, Power & Control: Modern drop bar designs are deeply tied to tradition. They are designed based on outdated road bike sizing rendering many of cycling intended hand positions unattainable when riding modern frame geometry. The ride positions that are the most powerful and allow for the most control have now shifted into virtually unattainable positions. DRiVe reclaims many of the ideal positions most critical to comfort, power, and control. - Fit Made Simple: To predict the DRiVe position of any given rider, we looked at an anthropological study focusing on the correlation among handbreadth, shoulder width, and height. By measuring your handbreadth we can easily identify a DRiVe that will be compatible with your body type. - Progressive Ergonomics: The tops and hoods complement the powerhouse DRiVe position and the Reach and DRiVe are progressively sized as the bar increases in width. This progressive sizing ensures the most powerful positions remain right where they are needed. - Weight: 315g (38cm) - Size: 36, 38, 40, 42, 44cm (center to center) - Reach: 70, 75, 80mm - Clamp Width: 100mm - Clamp Diameter: 31.8mm - Clip Compatible: Yes - Drop: 122mm, 136mm, 148mm - Drop Outsweep: 4° - Drive: 105mm, 120mm, 135mm - Internal Cable Routing: Yes (Mechanical / Di2) - Max Brake Lever Torque: 10Nm - Max Torque Clamping to Bar: 6Nm - Material: 6061-T6 AL

The DRV/AEROa is a high-performance aluminum aero drop bar featuring a truncated airfoil for aerodynamics, comfort and stiffness. The curve has been optimized for modern road levers. The innovative fit and ergonomics of the DRV system include a 7° ramp angle and a 4° flare in the drops, allowing a natural wrist angle for enhanced comfort and control. The DRiVe metric by Profile Design pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. What is your DRiVe? Gone are the days of simply measuring a drop bar by the standard reach, drop and width. Our DRiVe metric pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. - The DRiVe Metric: The DRiVe (Drop Reach Variant) position is measured via a 73° line beginning at the bar bore. The DRiVe metric pinpoints the line intersection with the drop. - DRiVe Reclaims Comfort, Power & Control: Modern drop bar designs are deeply tied to tradition. They are designed based on outdated road bike sizing rendering many of cycling intended hand positions unattainable when riding modern frame geometry. The ride positions that are the most powerful and allow for the most control have now shifted into virtually unattainable positions. DRiVe reclaims many of the ideal positions most critical to comfort, power, and control. - Fit Made Simple: To predict the DRiVe position of any given rider, we looked at an anthropological study focusing on the correlation among handbreadth, shoulder width, and height. By measuring your handbreadth we can easily identify a DRiVe that will be compatible with your body type. - Progressive Ergonomics: The tops and hoods complement the powerhouse DRiVe position and the Reach and DRiVe are progressively sized as the bar increases in width. This progressive sizing ensures the most powerful positions remain right where they are needed. - Weight: 315g (38cm) - Size: 36, 38, 40, 42, 44cm (center to center) - Reach: 70, 75, 80mm - Clamp Width: 100mm - Clamp Diameter: 31.8mm - Clip Compatible: Yes - Drop: 122mm, 136mm, 148mm - Drop Outsweep: 4° - Drive: 105mm, 120mm, 135mm - Internal Cable Routing: Yes (Mechanical / Di2) - Max Brake Lever Torque: 10Nm - Max Torque Clamping to Bar: 6Nm - Material: 6061-T6 AL

Sunlite's Road Handlebars are a light and comfortable addition to your road bike or gravel grinder. At 310 grams, this aluminum bar keeps your rig light while providing plenty of stability while cornering or sprinting for the hole shot. The classic road bend gives your bike a svelte look, too. And with plenty of widths to choose from, you get a bar that's tailored to your build and riding style.

- Slightly shorter version of the popular hi-rise style - Available in chrome plated and black versions

Building up an urban fixie or townie bike? Then you just have to have the classic Bull Horn Bars from Sunlite. They're made from aluminum with a steel center sleeve, so they're light, stiff and durable.

- Heavy duty steel construction - Variety of rises offered - Due to size some of the larger handlebars are freight intensive

Chrome plated long-horn style design.

Heavy-duty steel construction.

Heavy duty steel construction with a retro curved design.

Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops. - Width (center-to-center): 40cm, 42cm, 44cm, 46cm (+68m at drops) - Flare: 16-degrees - 42cm: 220g - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 120mm - Materials: EC70 carbon

The E100 name is not used lightly and represents the culmination of nearly 20 years of creating the highest quality carbon components on the market. The new E100 road bar uses the same critically acclaimed Maximum Contact Drop (MCD) shape as our other premium road bars, with a stiff mid-section and long tails at the end of the drops for optimized ride characteristics and more hand positions. Most ultra-light bars sacrifice stiffness, durability and drop length to save weight, but not Easton's. The E100 bar meets the same rigorous fatigue and impact testing standards as our other road bars and does so as the lightest road bar Easton has ever created — a feathery 178g for a 42cm bar. - Finish: Matte UD Carbon/Ultra Gloss decals - Bar weight: 178g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm - Reach: 80mm - Drop: 125mm - Materials: E100 carbon

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar. - 41-Thermal processed 4130 chromoly - Multi-butted

A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability. - Multi-Butted, traditional 7/8" crossbar for strength - Large radius bends for greater durability - Welded end caps to reduce flex - Post-weld heat-treated for added strength

Based on team rider feedback, Sunday introduces the new Nightshift Handlebars. - Laboratory tested and team proven - 4130 chromoly with post-weld heat-treatment - Large radius bends for greater durability - Traditional 7/8" crossbar for strength - 1.8/1.3 thick multi-butted main tubing - ED coating for anti-corrosion protection

- Super wide 800mm Enduro/Freeride/Downhill riser bar - Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars

- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos

An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. - Four rise options available from 30-100mm - AL-6061 aluminum alloy - ISO4210 Safety Tested for City/Trekking use - Not recommended for use with bar-ends or clip-on aero bars - 15-degree sweep

Your rock-steady set and forget road bar. Only a few grams heavier than the EA70 and sporting the same MCD drop technology as our top of the line road bars. These budget friendly bars will leave you comfortable in the saddle all day without breaking the bank. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 315g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Reach: 80mm - Drop: 125mm - Materials: EA50 alloy

The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort. - Application: Road Race, All-Road, Gravel, Cyclocross - Sizes: 38cm, 40cm, 42cm, 44cm, 46cm - Weights: 243g, 245g, 248g, 262g, 280g - Full Integrated Internal or External Routing - Lifetime Incident Protection and 5 Year Factory Warranty

Flared Adventure and Gravel bar made of EC90 carbon composite - 16 degrees of flare (adds 68mm to bar width at tip of drops) - Each width of bar has a unique diameter and length ergonomic top section - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 208g @ 42cm (width measured center-to-center)

Flared Adventure and Gravel bar made of EC90 carbon composite - 10 degrees of flare (adds 68mm to bar width at tip of drops) - Ergonomic top section and size-specific shape to optimize strength, weight and ride feel - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 205g @ 42cm (width measured center-to-center)