Parts & Accessories

Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads

A non-tubeless protective strip to cover the spoke holes in your ENVE carbon clinchers. 

Replacement axles for MX-2000 hubs. Size: 14 x 100 x 165mm - Supplier Part: KT-M18F - MPN: 370666 - Front/Rear: Front - Diameter: 14mm - OLD: 100mm Size: 14 x 110 x 180mm - Supplier Part: KT-389R - MPN: 370668 - Front/Rear: Rear - Diameter: 14mm - OLD: 110mm Size: 3/8-inch x 100 x 165mm - Supplier Part: KT-M17F - MPN: 370667 - Front/Rear: Front - Diameter: 3/8-inch - OLD: 100mm Size: 3/8-inch x 110 x 180mm - Supplier Part: KT-M88R - MPN: 370682 - Front/Rear: Rear - Diameter: 14mm slotted for 3/8-inch - OLD: 110mm

This lightweight, high-pressure rim tape offers great protection against spoke hole flats and is easy to install. This Italian-made tape is light and thin, so it will not inhibit tire fitting. Nylon elastic material is used to ensure a snug fit without movement.

This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

- Replacement steel quick release skewers

Replacement indicator chain for three speed Sturmey Archer hubs.

Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

Replaceable hub guard for the Odyssey Vandero Pro and GSport Roloway front hubs. Made from a special proprietary plastic blend for increased durability. Sold individually. Features: - Proprietary Plastic - Press Fit

Pawl and spring kits for Easton hubs.

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

- High performance adhesive tape, a great pairing with Velox Cement - Each roll is usually adequate for gluing two tubular tires - Protects tube from spoke/nipple/rim puncture

- Skewer Trek QR-18 100mm Bolt-On Front Black - Skewer Trek QR-18 135mm Bolt-On Rear Black

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

- Replacement rear skewer - Spacing: 135mm - Material: Steel

- Variable widths - Left: 30.5mm - Center: 52mm - Right: 30.5mm - Length: 113mm - Overall: 134mm

- Variable widths - Left: 32mm - Center: 52mm - Right: 32mm - Length: 116mm - Overall: 137mm

- Variable widths - Left: 32mm - Center: 52mm - Right: 36mm - Length: 120mm - Overall: 141mm

- Variable widths - Left: 32mm - Center: 52mm - Right: 35mm - Length: 119mm - Overall: 140mm

- Variable widths - Left: 32mm - Center: 52mm - Right: 37.5mm - Length: 121.5mm - Overall: 142.5mm

- Variable widths - Left: 35mm - Center: 52mm - Right: 39mm - Length: 126mm - Overall: 147mm

- Variable widths - Left: 35mm - Center: 52mm - Right: 40.5mm - Length: 127.5mm - Overall: 148.5mm

- Variable widths - Left: 28mm - Center: 52mm - Right: 28mm - Length: 108mm - Overall: 129mm

Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles

The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock. - Improves tension consistency and overall build quality - Prevents spoke wind up - Offers secure thread lock between spoke and nipple - Prevents corrosion between spoke and nipple - Can be used dry or as a slurry - Works great with mechanically locking nipples