Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Seatposts

$149.99
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
$34.99
- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g
$309.00
- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop Specs: - Seat Post Diameter: 30.9mm - Travel: 200mm - Cable Routing: Internal
$309.00
Saddle Up Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height and a 25g weight savings from the previous version. This post will treat you right. Less is More New, patent-pending FOX seat clamp design dramatically reduces stack height, allowing you to fit more travel into a shorter space. Full Coverage Proven FOX-designed internals provide infinite height adjustment, but perhaps more importantly—even easier serviceability. No-Sweat Installation Mounting a saddle and getting your saddle position dialed is easy thanks to the user-friendly seatpost clamp. Brilliantly Uncomplicated Uses standard shifter cable and housing. You know, just to keep things real. Oh yeah—it's also 25g lighter than the previous version. - Compatible with Matchmaker - Includes post only - Mechanical lever actuation - Head Type: Zero Offset—2 Bolt - Weight: 520g
$309.00
- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop Specs: - Seat Post Diameter: 31.6mm - Travel: 200mm - Cable Routing: Internal
$329.00
- XC - Gravel - Trail focused post - Two-position simplicity - Featherweight - Cable routes in either direction for compatibility with any dropper lever - Zero offset - 352g
$89.99
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
$27.29
The Pure Cycles seatpost is a no frills no nonsense seatpost perfect for a basic replacement.
$205.00 - $211.00
We designed the Tall & Handsome with strength and elegance in mind, but also to be super easy to setup and adjust. Like all PAUL components, it’s built to the highest standards for tolerance, function, reliability, and ease of use. Machined by us here in sunny Chico, California. - Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA
$29.99
It’s a traditional straight up pivotal design with a 200mm length.
$25.99
Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install. SPECS - 25.4mm diameter - 6061-T6 Aluminium, CNC machined
$18.99 - $19.99
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.
$119.00
A specific eTen hydraulic cartridge with single bolt offset saddle clamp allow the enjoyment of droppers at a low price, available with 100mm of travel. - Black hard anodized stanchion and an air spring, hydraulically locked cartridge - Single-bolt alloy head - Remote sold separately
$45.00
Let Giant's Comfort Suspension Seatpost take the sting out of cycling. This plush shock-absorbing post mutes road vibration and ensures rider comfort.
$40.00
Giant's Connect Seatpost is tough and durable thanks to its forged 6061 aluminum construction. The reversible outer clamp design allows for 12mm or 23mm offset options and the extra-long saddle clamp is compatible with lightweight carbon rails.
$229.99 - $249.99
- Up to 200mm of vertical travel adjustability with limitless positioning - Tool-free adjustable travel design which let you adjust the travel by 5mm increment depending of rider's preference - Internal cable routing only - Clamp design compatible with standard 7mm (alloy) or 9mm (carbon) saddle rails - Includes 1x remote lever Travel option: - 95-120mm - 120-150mm - 140-170mm - 170-200mm
$195.00
Features - Anti-Twist Technology keeps the saddle firmly positioned - Steel proprietary air & oil cartridge offers smooth consistent load range adjustment - Internal cable routing - Secure 2-bolt clamp design with steel hardware - Clamp design compatible with standard 7mm (alloy) or 9mm (composite) saddle rails - Extra-long lower saddle rail guide designed to cradle lightweight saddle rails securely - Includes updated 2x remote lever
$184.00
Giant's Vector Seatpost offers superb aerodynamics, low weight, and the vibration damping high-end carbon is known for. The adjustable clamp head can be set up to provide either -5 or 25mm offset without any additional parts or tools.
$53.99
The directional butting of the Energy SBS SB20 seatpost’s 6066-aluminum shaft gives it thicker walls fore and aft for stiffness and thinner walls at the sides to cut weight. A forged and machined alloy head is bonded to the top of the shaft. - 3D forged and CNC machined AL6066 w/ alloy head - Directionally butted for low weight and additional strength - Chromoly hardware - Clamp Style: Standard Rails
$202.00
With shaft and head formed from one continuous carbon fiber section, the K-Force Light SB0 seatpost is both light and strong. The K-Force Light SB0 features a zero-offset (in-line) clamp for a forward saddle position, with our forged alloy Minimal Top Clamp holding the saddle securely. - Forged alloy Minimal Top Clamp (MTC) - Increased setback for correct fit and saddle support - One-piece continuous carbon fiber construction - M5 chromoly and stainless steel hardware design - Zero Setback - Fits 7mm standard rails and 7x9mm oval rails - 185 grams
$202.00
The K-Force Light SB25 post's one-piece carbon fiber shaft and head are topped off with a forged alloy Minimal Top Clamp, giving a full range of adjustment and secure saddle mounting at a very low weight. There's also the option of mounting a Shimano Di2 battery in the bottom of the post. - Forged alloy Minimal Top Clamp (MTC) - One-piece continuous carbon fiber construction - Fit 7mm standard rails and 7x9mm oval rails - Weight: 204 grams
$62.99
FSA's Metropolis seatpost is CNC machined from AL6069 aluminum and features a forged alloy single-bolt head with chromoly hardware. Simple and elegant, this seatpost gets the job done weighing a scant 257 grams.
$96.00
The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams
$96.00
The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder. - UD carbon shaft with bonded alloy head - Forged alloy "SBS" 2-bolt head - Chromoly hardware - 20mm setback - Fits 7mm standard rails and 7x9mm oval rails - 221 grams
$359.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Factory Series models feature Genuine Kashima Coat - Remote lever sold separately
$309.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset
$299.95
- Defined suspension on rough surfaces - Lightweight and comfortable construction - Uncompromised road cycling performance Unique comfort, lightweight and aesthetically modern: The Ergon leaf spring seatpost revolutionizes comfort on the road bike, all-road and gravel bike. Rough roads and gravel are smoothed out by the two carbon fiber VCLS leaf springs, while the saddle angle remains unchanged by the parallel displacement of the two leaf springs and the floating flip head. The precise and highly sensitive tuned leaf springs work so well that they do not affect the performance of the bike or cyclist. The CF Allroad Pro Carbon Setback model offers a 25mm of setback
$69.99
The EA70 Zero is Easton’s top-end aluminum seatpost, with a sleek, low-profile clamp design, impressive stability and great clearance. This post features EA70 TaperWall aluminum tubing coupled with a durable two-bolt integrated head.
$214.99
The EA70 AX dropper post joins our AX series of horizon-expanding drop bar gravel and adventure componentry. Features include a reliable cartridge design, internal routing and availability in two lengths - 350mm and 400mm. Our EA70 AX post brings 50mm of drop, allowing for fitment on everything from your wide-tired CX bike to modern gravel bikes. - Can be paired with drop bar optimized levers or drop bar compatible shifters - Cable attaches from either direction for compatibility with all dropper levers - Two lengths for better fitment on dropped top-tube gravel bike frame designs - Finish: Black Ano - Weight: 350mm - 400g - Head Offset:0mm - Drop: 50mm - Quill Sizes: 27.2mm Diameter - Material: EA70 Alloy
$169.99
The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations. - Finish: Matte Black UD Carbon/Matte Black Head - Weight: Zero offset, 210g; Setback offset, 223g - Head offset: 0mm; 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Rail clamps: 7mm round; 7mm x 9mm oval (both included) - Material: EC70 carbon